![]() ![]() This conversion kit comes with the Drivers Side and Passengers Side Seat Belts and Plates to cover the holes left by the removal of the old seat belt retractor mechanism.It does away with the unreliable retractor mechanism and replaces it with manually adjusted Seat Belts.This is the Current Suzuki OEM Seat Belt for the Suzuki Samurai.If you need seat slides we have them under the "Interior" category.These seats are made from heavy, durable pressed vinyl and have an off-white patterned seating area and a dark gray side and back.These seats are Suzuki OEM seats so your parts will fit perfectly on these seats no drilling, no cutting, no cussing, just bolts right up.These are NOT COVERS but rather the COVERS/FRAMES & CUSHIONS plus HEADRESTS for the Driver Side & Passenger Side.This is the OEM Suzuki Samurai JA Model, Driver's and Passenger's Front Seats plus Headrests.Qty 1 - Tilt Recline Mechanism w/ Cover.Qty 1 - Seat Back Cushion - Driver’s Side.Qty 1 - Seat Bottom Cushion - Driver’s Side.The front sides vary slightly and the back sides are BLACK. They will need to be covered, or reupholstered. NOTE: These seats are on Clearance due to color variation.These seats are made from heavy, durable pressed vinyl and have an off-white patterned seating area and a black side and back.These seats are not sold with a headrest.These are NOT COVERS but rather the COVERS/FRAMES & CUSHIONS for the Driver Side.This is the OEM Suzuki Samurai JA Model, Driver's Front Seat plus Tilt Mechanism with Cover.Qty 1 - Seat Back Cushion - Passenger’s Side.Qty 1 - Seat Bottom Cushion - Passenger’s Side.You will need your existing Suzuki OEM seat hardware to assemble these seats.These are high quality usable seats that will last many years with the only negative being minor cosmetic deficiencies that can easily be overlooked and corrected.The back side is BLACK and the bottom cushion is GRAY. They will need to be covered, or reupholstered. NOTE: These seats are on Clearance due to color variation and light staining.These will fit in both JL and JX models.These seats are made from heavy, durable pressed vinyl and have an off-white patterned seating area and a black side and gray back.The seat color pattern is a light color that is designed to reflect the suns heat giving you a cooler seat in the summer, especially when the tops off.These seats are Suzuki OEM seats so your parts will fit perfectly on these seats no drilling, no cutting just bolts right up.All you will need to do is to remove your existing seats and take off the seat slides and seat recline mechanisms and bolt directly on to these.These seats are not sold with a headrest nor recline mechanism.These are NOT COVERS but rather the COVERS/FRAMES & CUSHIONS for the Passenger Side.This is the OEM Suzuki Samurai JA Model, Passenger's Front Seat.NOTE: REAR TIRE CARRIER IS NOT INCLUDED! SERENITY TIRE CARRIER IS PART NUMBER 2-405STC SOLD SEPARATELY. We strongly recommend Rustoleum "hammered" paint. The Dominators like almost all ZOR products are shipped in a raw steel condition only. The Dominators use four large metric heavy duty bolts to the existing frame and three smaller bolts for upper frame support. Heavily welded in corners and seams for strength and durability. They were designed to hug the body and provide optimum protection while increasing off road clearance. The shells are made with 3/16" cold rolled steel folded on a 100 ton press. Also includes a supported to frame Class3 receiver!įor 1st& 2nd Generation 1989 to 1998 Suzuki Sidekicks & Geo Trackers. This bumper features a multi-faceted face with adjustable side tails for body lifts of up to 2". ZOR Dominator rear bumper for Sidekick and Trackers. Batch for February delivery is almost sold out! Order soon or wait till Summer time for next batch. ![]()
0 Comments
Leave a Reply. |